IIID Max ABS Filament — When Your Prints Need to Take a Beating

Need parts that can handle heat, impact, and real-world abuse? IIID Max ABS is the filament for functional, industrial-strength prints that won't crack, warp, or soften under pressure. When PLA isn't tough enough and PETG isn't heat-resistant enough — ABS is the answer.

Specs at a glance:

• Diameter: 1.75mm (±0.03mm dimensional accuracy)
• Spool weight: 1kg / 2.2 lbs
• Print temperature: 230°C – 250°C
• Bed temperature: 90°C – 110°C
• Drying temperature: 80°C for 4 hours
• Heat deflection: ~100°C (parts won't soften in hot environments)
• Available colors: Red, Orange, Tan, Gray, Black, Blue, Emerald

Why makers choose IIID Max ABS:

• Superior heat resistance — ABS handles temperatures up to ~100°C without softening. Perfect for parts near engines, electronics enclosures, or anything exposed to heat that would destroy PLA.
• High impact strength — ABS absorbs impacts instead of shattering. Drop it, flex it, stress it — ABS bends before it breaks.
• Acetone-smoothable — Want a perfectly smooth, injection-molded look? ABS can be vapor-smoothed with acetone to eliminate layer lines completely. No sanding, no painting.
• Excellent machinability — ABS parts can be drilled, tapped, sanded, glued, and painted after printing. Ideal for post-processing workflows.
• Consistent, reliable extrusion — Tight diameter tolerance means fewer clogs, even layers, and predictable prints every time.
• Works with enclosed FDM 3D printers — Bambu Lab (with enclosure), Creality K1, Prusa (with enclosure), and any printer capable of 250°C+ nozzle temps with a heated bed.
• Vacuum-sealed & moisture-free — Ships dry and ready to print.

Perfect for:

• Functional prototypes and end-use mechanical parts
• Electronics enclosures and housings
• Automotive brackets, clips, and under-hood components
• Jigs, fixtures, and manufacturing tools
• LEGO-compatible parts and snap-fit assemblies
• Any part that needs to survive heat, impact, or chemical exposure

Important: ABS requires an enclosed printer (or at minimum a draft-free environment) to prevent warping and layer splitting. Good bed adhesion is essential — use ABS slurry, glue stick, or Kapton tape on a heated bed at 90–110°C. Print in a well-ventilated area as ABS emits fumes during printing. If your spool has been exposed to humidity, dry at 80°C for 4 hours before printing.

🚚 Free shipping on all U.S. orders.