IIID Max High-Speed TPU (95A) Filament — Flexible, Tough, and Built for Speed

Need flexible 3D prints that don't take forever? IIID Max High-Speed TPU is a 95A Shore hardness flexible filament engineered for fast, reliable printing — no more crawling at 20mm/s just to avoid jams. Print flexible parts at real speeds with smooth, consistent extrusion.

Specs at a glance:

• Diameter: 1.75mm (±0.03mm dimensional accuracy)
• Spool weight: 1kg / 2.2 lbs
• Shore hardness: 95A (flexible but firm — similar to a shoe sole)
• Print temperature: 210°C – 230°C
• Bed temperature: 50°C – 60°C
• Drying temperature: 70°C for 6 hours
• Available colors: Bamboo Green, Black, Gemstone Blue, Orange, Red, Yellow

Why makers choose IIID Max TPU:

• High-speed flexible printing — Prints significantly faster than traditional TPU filaments while maintaining smooth, even extrusion. No more 8-hour phone cases.
• 95A hardness — the sweet spot — Flexible enough to bend and absorb impact, firm enough to hold shape and print reliably. Perfect balance between rubber-like softness and structural integrity.
• No-clog formula — Consistent diameter and low moisture absorption mean fewer jams, less stringing, and no mid-print failures. Feeds cleanly through both direct drive and Bowden setups.
• Extreme durability — Printed parts resist abrasion, impact, and repeated bending without cracking or delaminating. TPU parts outlast PLA and ABS in real-world stress.
• Works with all FDM 3D printers — Bambu Lab, Creality Ender & K1, Prusa, AnkerMake, Elegoo Neptune. Direct drive extruders give best results; Bowden works with reduced retraction.
• Vacuum-sealed & moisture-free — Ships dry and ready to print.

Perfect for:

• Phone cases, tablet covers, and protective bumpers
• Drone bumpers and vibration dampeners
• Flexible hinges, gaskets, seals, and O-rings
• Shoe insoles and wearable prototypes
• RC car tires and grip pads
• Industrial shock-absorbing mounts and bushings

Pro tip: TPU absorbs moisture over time, which causes stringing and bubbling. If your spool has been open for a while, dry it at 70°C for 6 hours in a filament dryer before printing. For best results, reduce retraction to 0.5–2mm, slow down the first 2 layers for strong bed adhesion, and print with a direct drive extruder if possible. A light coat of glue stick on the bed helps TPU stick without warping.

🚚 Free shipping on all U.S. orders.