Pop-up Wallet STL

The STL (Standard Tessellation Language or STereoLithography) file format is the most commonly used format for 3D printing. 

When used with a 3D slicer, it allows a computer to communicate with the 3D printer hardware, printing a model.

Since its humble beginnings, many CAD software packages have adopted and supported the STL file format. 

It is a 3D printing process and corresponding file type created by Chuck Hull at 3D Systems in the 1980s. It is for rapid prototyping, 3D printing, and computer-aided manufacturing.

3d printed pop up wallet stl file accessories category

STL File Contribution

We invite all the STL Creators and artists to share some of your creations and help us build an excellent Free STL library.

In exchange, we will put your info, website, and social media so people can see and buy other creations from you. No file is too small or complicated (they can be parts, mods, props, whatever you want to share).

Please email us at sales@iiidmax.com with the subject (STL Creator Contribution) with your contact information, such as your social media (IG, TikTok, Youtube, etc.). To receive your well-deserved recognition from us & the community.

DISCLAIMER: Files are FREE only for personal use. If you are planning to use it commercially, don’t hesitate to get in touch with the author.

This work is protected under Creative Commons (4.0 Licencia Internacional) Attribution-NonCommercial.

Printed Pop-Up Wallet STL Author Recognition

We thank Hugo for this practical Pop-Up Wallet STL.

The design is simple and minimalistic, focused on ease of use.

Printed Pop-Up Wallet STL Description

This is his own design of a pop-up card wallet. It uses a front swipe motion to access the cards. He made it print-in-place so that it is easier and ready to use right out of the printer.

Although it is printed in place, it requires some pressing and forcing to free the movement.

The cards are held in place thanks to the 2 front slots that take advantage of the plastic’s elasticity to keep them from falling out even upside down. He sliced the retention mechanism into 2 parts (with the groove on the side that is not straight) to prevent having one large card that stretches out all the plastic and lets go of all the other cards.

How to Use the Pop-Up Wallet

After the print is done (printed upright), press on the pivot in the back of the wallet to free the mechanism. Press it in different directions, you should hear some clicks from the parts coming apart. (you can press quite hard if needed)

He made an extra 2 holes in the back to better detach the mechanism. You can push with a screwdriver head to free the pieces. Also, free up the front strip, then you can force a bit and it should make it move.

It is a bit rough at the start, but move it several times all the way to smooth the movement.

error: Content is protected !!