The STL (Standard Tessellation Language or STereoLithography) file format is the most commonly used format for 3D printing.
When used with a 3D slicer, it allows a computer to communicate with the 3D printer hardware, printing a model.
Since its humble beginnings, many CAD software packages have adopted and supported the STL file format.
It is a 3D printing process and corresponding file type created by Chuck Hull at 3D Systems in the 1980s. It is for rapid prototyping, 3D printing, and computer-aided manufacturing.
DnD Chest STL Attribution
Download a DnD Chest for FREE, created by AGROENINGEN, and securely store any of your small and most precious DnD collections under lock.
This chest DnD model is printable without supports except for the “Lock Inner Ring”. It is advisable to print the chest top and bottom with rafts to prevent the lifting of the sharp corners.
DISCLAIMER:
You are authorized to:
- Share — copy, distribute, and communicate the material by any means and in any format;
- Adapt — remix, transform, and create from the material for any use.
What is not allowed:
- No sharing or adaptation without attribution;
- No sharing or adaptation under different conditions;
- No commercial use.
Under the following terms:
DnD Chest Print Information
Files that need to be printed more than once (duplicates):
- Chest Foot x4
- Hinge Pin x2
- Hinge Pin End x2
- Ring x2
- Ring Holder x2
Parts that need to be glued:
- Chest Foot x4 (depending on how tight it fits)
- Hinge Pin End x2 (depending on how tight it fits)
- Ring Holder x2
- Lock Hook
- Lock Back
If the Hinge pin doesn’t fit, then try sanding it down until it’s a bit smoother. It needs to be a tight fit for the lid to be able to remain up, but it also shouldn’t be completely forced in.
Also, make sure you have the correct rotation.
Once you’ve finished downloading your D&D Castle Gate, follow these steps:
- Use appropriate software to unzip the archive (if the file is in .zip or .rar format).
- Import the STL or OBJ file (or any other 3D printable format) into your preferred 3D slicer program.
- Adjust all the necessary settings in your slicer to prepare the 3D printing process and generate the final G-Code.
- Transfer the G-Code to your 3D printer using methods such as an SD card, USB connection, WiFi, or any other suitable means.
3D Printing STL File Contribution
We invite all the STL Creators and artists to share some of your creations and help us build an excellent Free STL File library.
In exchange, we will put your info, website, and social media so people can see and buy other creations from you. No file is too small or complicated (they can be parts, mods, props, or whatever you want to share).
Please email us at sales@iiidmax.com with the subject (STL Creator Contribution) with your contact information, such as your social media (IG, TikTok, Youtube, etc.). To receive your well-deserved recognition from us & the community.
