Filamet™ - Ceramic Sample
Filamet™ - Ceramic Sample
Create real ceramic parts using any open-architecture FFF/FDM 3D printer—or even a 3D printing pen.
Available Formats:
1.75mm and 2.85mm diameters in 100g weight
| Ceramic Load By Mass |
Recommended Nozzle | Filament Density (g/cc) | |
|---|---|---|---|
| Basalt Moon Dust | 60.0 – 62.0% | 0.6mm Hardened Steel | 1.60 – 1.75 |
| Porcelain | 48.0 – 52.0% | 0.6mm Hardened Steel | 1.40 – 1.50 |
| Rapid 3DShield Boron Carbide | 50.0 – 60.0% | 0.6mm Hardened Steel | 1.30 – 1.50 |
| Silicon Carbide | 63.0 – 66.0% | 0.6mm Hardened Steel | 1.88 – 1.95 |
| Zirconium Silicate (Zircopax®) | 64.0 – 69.0% | 0.6mm Hardened Steel | 2.10 – 2.19 |
Samples are packaged spooless.
High Compatibility:
Works with virtually any open-architecture 3D printer—no proprietary hardware or specialized equipment required. Also compatible with 3D printing pens.
Our list of Trusted 3D Printers – Click Here
Easy Printing Experience:
-
Prints similar to PLA
-
Minimal to no warping
-
Ensure the filament feeds straight into the extruder
-
Less hygroscopic than PLA
-
Do not dry this filament—drying will degrade the binder
Fully Sinterable:
Most of our ceramic filaments are fully sinterable. After printing, your part can be fired in a furnace to become 100% ceramic.
All materials print just like PLA on most open-architecture 3D printers.
Tested 3D Printers:
Anet A8
- 0.6mm MK8 nozzle required.
- Blue painter’s tape recommended.
- Direct drive out of the box!
The Virtual Foundry Approved
AnkerMake M5C
- 0.6mm nozzle required (proprietary).
- Blue painter’s tape recommended.
Partner Innovator Tested
Bambu Lab A1/A1 Mini
- 0.6mm hardened steel nozzle required.
- Bambu Dual-Sided Textured PEI Plate recommended.
- Filamet™ is not compatible with the AMS Lite.
The Virtual Foundry Approved
Bambu Lab P1P/P1S
- 0.6mm nozzle required.
- Direct drive out of the box!
- Filamet™ is not compatible with the AMS.
The Virtual Foundry Approved
Bambu Lab X1 Carbon/X1E
- 0.6mm nozzle required.
- Bambu Dual-Sided Textured PEI Plate recommended.
The Virtual Foundry Approved
Creality Ender 3 / Pro
- 0.6mm MK8 nozzle required.
- Direct drive extruder upgrade recommended.
The Virtual Foundry Approved
Creality Ender 3 Max Neo
- 0.6mm MK8 nozzle required.
- Upgrade to textured spring steel PEI recommended.
Partner Innovator Tested
Creality Ender 3 S1 / Pro
- 0.6mm nozzle required.
- Direct drive out of the box!
Partner Innovator Tested
Creality Ender 5 Pro
- 0.6mm MK8 nozzle required.
- Direct drive upgrade recommended.
The Virtual Foundry Approved
Creality Ender 5 Plus
- 0.6mm MK8 nozzle required.
- Spools should be hung 22 – 28 inches above.
The Virtual Foundry Approved
Creality Ender 5 S1
- 0.6mm nozzle required.
- Direct drive out of the box!
Partner Innovator Tested
FlashForge Creator Pro
- 0.6mm MK10 nozzle required.
- Changing feeders for adjustable tension recommended.
The Virtual Foundry Approved
FLSUN QQ-S-Pro
- 0.6mm MK8 nozzle required.
- Blue painter’s tape recommended.
Partner Innovator Tested
gCreate gMax 2 PRO
- 0.6mm E3D V6 Style nozzle required.
- Direct drive out of the box!
Partner Innovator Tested
Levil EDU Mill
- 0.6mm MK8 nozzle required.
- Direct drive out of the box!
The Virtual Foundry Approved
Prusa i3 MK3
- 0.6mm E3D V6 Style nozzle required.
- Direct drive out of the box!
Partner Innovator Tested
Qidi Tech X Max
- 0.6mm MK10 nozzle required.
- Spools should be hung 22 – 28 inches above.
Partner Innovator Tested
Raise3D E2
- 0.6mm nozzle required (proprietary).
- Direct drive out of the box!
Partner Innovator Tested
Snapmaker 2.0
- 0.6mm nozzle required (proprietary).
- Direct drive out of the box!
Partner Innovator Tested
Sovol SV-04 IDEX
- 0.6mm nozzle required.
- Direct drive out of the box!
Partner Innovator Tested
Tenlog TL-D3 Pro
- 0.6mm nozzle required.
- Direct drive out of the box!
Partner Innovator Tested
UltiMaker S5
- 0.6mm Print Core CC required.
- Separate spool holder recommended.
The Virtual Foundry Approved
| Size |
1.75mm, 2.85mm |
|---|---|
| Material |
Basalt Moon Dust, Porcelain, R3DS Boron Carbide, Silicon Carbide, Zirconium Silicate |